H3051: ±5kV/12mA/ DC~7.5kHz-_±800V to ±7.5KV Amplifier Series

H3051: ±5kV/12mA/ DC~7.5kHz-

✓ HV Amplification：±5KV(10KVpp)

✓ Powerful Output：±12mA ,60W(across full band)

✓ Large Signal Bandwidth：DC-7.5kHz

Call the hotline

8610-53351705

Online Consultation

Introduction

H3051 High Voltage Amplifier

Huatek H3051 is an outstanding desktop high voltage amplifier.

H3051 not only has variable digital gain and offset adjustment, it also has a unique transient protection mode (Hiccup) with auto-recovery from a fault. It’s excellent performance and form factor can be applied in various high voltage scenarios.

✓ HV Amplification：±5KV(10KVpp)

✓ Powerful Output：±12mA ,60W

✓ Large Signal Bandwidth：DC-7.5kHz

Features

Ensured Rated Output Across Full Band with Effective Compensation：

Max ±10V input ; Gain 500 Fixed

Monitor：

Voltage Monitor, Current Monitor

Intelligent Protection：

Overload, Short Circuit；Single Mode, Hiccup Mode (Auto-Recovery)；One-key lock

Intelligent Cooling：

On Demand Air cooling ； Low Noise；ensuring component and circuit long term reliability

Specifications

Max. Output Voltage	±5kV(10kVp-p)	Voltage Monitor	1V/500V
Max. Output Current	±12mA，across full frequence range	Current Monitor	200mV/mA
Peak Output Power	60W	V/I Monitor Output Impedance	50Ω
Output Impedance	1kΩ	V/I Monitor Output Connector	BNC
HV Output Connector	4mm HVconnector	THD	-
Large Signal Bandwidth(-3dB)	DC-7.5kHz	Communication Interface	USB-C
Small Signal Bandwidth(-3dB)	DC-37.5kHZ	Power Supply	AC110~ 220V/50/60Hz
Slew Rate	>167V/us	Operating Environment	0~45 ℃/≤ 85% RH Non condensation /Altitude up to 2000 meters
Voltage Gain	Fixed 500	Stability	Non-cumulative drift:<50ppm/h Temperature-drift: 100ppm/℃ 23℃±3℃, preheating for 30min
DC Voltage Source	None	Dimensions (exclude protrusions)	133mm300mm400 (HWD)
Response Time	-	Weight	15Kg
Zero Drift	＜±100mV
Max. Input Voltage	±10V
Input Impedance	10KΩ
Input Connector	BNC
Output Protection	Overload，Short Circuit
Protection Mode	Hiccup（Auto Recovery）